Veranda 73003270 Guía de instalación Pagina 2

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 6
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 1
2
a. Layout railing installation to determine post locations
b. Beneath all post locations install at least two 2x8 blocks using at least three #10x3 ½” deck screws penetrating
through the joists at least 1 ½” into the blocks (see diagram for details)
Raise bottom
insert temporarily
to allow room to
fasten steel post
to deck
Material Checklist:
Tape Measure
Level
Hacksaw or Chopsaw
Rubber Mallet
Drill
Drill bits
Socket Wrench (5/16" Socket)
ATTENTION:
Before you assemble the kit:
PLEASE TAKE A COMPLETE INVENTORY OF ALL PARTS USING THE KIT CONTENTS.
DO NOT ATTEMPT TO ASSEMBLE THE KIT IF PARTS ARE MISSING OR DAMAGED.
Please do not return the product to the store, for assistance or replacement parts call:
1-800-336-2383
Wood Blocks
Steel Washers (For Shims)
Grade 5 Steel 5/16" Bolts with nuts
galvanized per ASTM F2329
Pencil
Masonry Anchors
a. Layout railing installation to determine post locations
b. Beneath all post locations install at least two 2x8 blocks using at least three #10x3 ½” deck screws penetrating
through the joists at least 1 ½” into the blocks (see diagram for details)
1
a. Layout railing installation to determine post locations
1
a. Layout railing installation to determine post locations
1
a. Layout railing installation to determine post locations
1
a. Layout railing installation to determine post locations
b. Beneath all post locations install at least two 2x8 blocks using at least three #10x3 ½” deck screws penetrating
1
b. Beneath all post locations install at least two 2x8 blocks using at least three #10x3 ½” deck screws penetrating
through the joists at least 1 ½” into the blocks (see diagram for details)
1
through the joists at least 1 ½” into the blocks (see diagram for details)
2
2
3
3
Mark holes through the
bottom plate of steel
post onto deck surface
– remove steel post and
drill 3/8” hole in all four
marks through the deck
board and blocking
Install blocking at post locations
For Wood/Composite Deck Applications:
Prepare to Attach
Mark Holes
Thank you for choosing the Barrette Outdoor Living Post
Install Kit. Please read the instructions completely before
assembling your rail. Retain manual and your dated sales
slip for future reference and warranty claims.
Before You Begin…
Make sure your project meets local building codes before
beginning installation.
Vista de pagina 1
1 2 3 4 5 6

Comentarios a estos manuales

Sin comentarios